How to convert dynamic disk to basic disk

 Dynamic disks are a type of disk configuration used in Windows operating systems that provide more advanced features than Basic disks. Dynamic disks provide greater flexibility in managing and organizing disk space, allowing for operations that span multiple disks, implementing fault tolerance through disk mirroring or RAID configurations, and restoring or restoring data. Extend or shrink a volume without the need to delete it.

Dynamic disks can create mirrored volumes by duplicating data across multiple disks. If one disk fails, the system can still access the data from the mirror, providing redundancy and fault tolerance.

Dynamic disks support a variety of RAID configurations, including RAID-5 and RAID-1. RAID (Redundant Array of Independent Disks) provides data redundancy, improved performance, or a combination of both, by using multiple disks in a specific configuration.

Convert dynamic disk to basic disk with the help of third-party Software:

Converting a dynamic disk back to a basic disk in Windows requires a process called disk reversion, which involves deleting all volumes on the dynamic disk and converting it back to a basic disk. It's important to note that this process will result in the loss of all data on the dynamic disk, so it's crucial to back up any important data before proceeding.

It is worth noting that dynamic disks are specific to the Windows operating system and are not compatible with other operating systems such as macOS or Linux. Additionally, dynamic disks cannot be converted back to basic disks without deleting all data on them. Therefore, it is important to consider the implications and limitations before converting a basic disk to a dynamic disk.

The process of converting a dynamic disk back to a basic disk requires deleting all volumes on the dynamic disk, which will result in data loss. Hence, it is important to back up any important data before proceeding with the conversion. Here's a step-by-step guide on how to convert a dynamic disk to a basic disk:


This process requires the use of third-party disk management software, as the built-in Disk Management tool in Windows does not provide any software to convert dynamic disks to basic disks. One such software is EaseUS Partition Master.

Download and install a third-party disk management tool such as EaseUS Partition Master.

Some Useful Important Links

EaseUS Partition Master Download  Click Here
Activate 4K Video Downloader 4.24
Microsoft edge search bar
Secure Your Google Profile with LockPW

Launch Disk Management software and locate the dynamic disk that you want to convert to a basic disk.

Once you are sure that your data is backed up, select the dynamic disk and choose the option to delete all volumes on the disk. This action will erase all data on the dynamic disk.

The dynamic disk should be free after deleting the volume. Right-click on the dynamic disk and select the option to convert it to basic disk. this process may vary depending on the disk management software you're using, but there should be an option to change the disk type.

Follow the prompts and confirm your intention to convert the disc. The conversion process will begin, and it may take some time to complete.

After the conversion is finished, you should have an original disc. Now you can create new partitions and restore your data from the backup you created earlier.

Remember to use caution when performing disc operations, especially when converting disc types. It is advised to consult the documentation or user guide of the disk management software you use, as the steps and options may vary slightly.

Convert dynamic disk to basic disk with the Diskpart:

To convert a dynamic disk to a basic disk in Windows, you can use the command-line utility called "DiskPart." Here are the steps to follow:

Press the Windows key + R and select "Diskpart Prompt"  to open an elevated command prompt.

Type the following command to launch DiskPart and press Enter:

Once you are in the DiskPart utility, list all the disks by running the following command and pressing Enter:

list disk

Take note of the disk number for the dynamic disk you want to convert.

Select the dynamic disk by typing the following command, replacing "disk_number" with the appropriate disk number you noted in the previous step:

select disk disk_number

Delete all the volumes on the selected disk by running the following command:

Clean Disk

Repeat this command until all volumes on the dynamic disk are deleted.

Convert the dynamic disk to a basic disk by entering the following command:

Convert basic

Once the conversion is complete, you can exit DiskPart by typing:

After following these steps, your dynamic disk will be converted back to a basic disk. Remember that this process erases all data on the disk, so it's crucial to have a backup of your important files before proceeding

🌎 Convert dynamic disk to basic disk Click Here
🌎 How to Activate 4K Video Downloader 4.24 Click Here
🌎 logoff , Hidernate , Sleeping & Switch user Click Here
🌎 hp pavilion G4 white display Solution Click Here
🌎 How to Remove / Disable LockPW Click Here
🌎 Hindi Typing Kaise Kare with Google Input Tool Click Here
🌎 Recent-post Click Here
🌎 Home-page Click Here

Post a Comment

* Please Don't Spam Here. All the Comments are Reviewed by Admin.